Precision 8mm Dia Micro Slider Stepper Motor 22mm Length Copper Slider With Bracket Linear

8mm Diameter Micro Slider Screw Length 22mm Micro Slider Stepper Motor Copper Slider With Bracket Linear Stepper Motor:

VSM0806 is a precision micro stepping motor, the output shaft has a lead screw with a pitch of 0.4mm, and the lead screw and the lead screw supported by the lead screw rotate into thrust.
The basic step angle of the motor is 18 degrees, and the motor runs 20 steps per week, so the displacement resolution can reach 0.02mm, achieving the purpose of precise control.
In terms of actuators, the subdivision drive method is used to satisfy.
Due to its excellent characteristics such as small size, high precision and easy control, this micro stepping motor is widely used in cameras, beauty equipment, medical equipment, vending machines, rapid detection, optical instruments, lenses, precision medical equipment, automatic doors locks, etc.
The input part of the motor is FPC, but it can be changed to the form of connecting wire, PCB, etc. according to customer needs.
Mounting brackets can be replaced according to customer requirements.

Main Application

1) vending machine

2) Optical instruments

3) Precision medical devices

4) beauty equipment

Other precise control application

8mm M2 lead screw slider stepper motor Specifications:

Drawing of 8mm plastic slider stepper motor with 22mm stroke:

Product display for 8mm plastic slider stepper motor:

8mm Micro slider Linear Stepping Motor Screw motor with Bracket Stepper Motor

Customers can customize content:

1. In terms of the outer diameter of the motor, different sizes such as 6mm, 8mm, 10mm, 15mm, 20mm, 25mm can be selected according to the customer's use environment and space strength.

2. Its outlet position can be freely selected within a 360-degree range to meet the installation requirements in the best state. At the same time, the connector can choose lead, PCB, FPC bare pin.

2. The specific stroke is based on customer requirements, and the effective stroke of the motor can be customized within a certain range, mainly considering the diameter and length of the lead screw.

Usually the maximum length of M2 screws can be 50mm, M3 screws can be 100mm, and M4 screws can be 100mm. Can also do 150mm. Small motors use a lead screw with an excessively large diameter, which consumes a lot of power, so comprehensive consideration should be taken when selecting a motor.

4. The material of the slider is generally plastic, which is easy to form and economical.

When there are special use environments and requirements, the slider can also use metal parts.

Of course, the resulting cost will be relatively high, which is determined according to the customer's requirements for the shape and size of the slider.

Wide range of applications:

Packaging diagram: